Nothing brings family and friends together like the beauty and warmth of a fire. Real Fyre® Direct Vent Gas Inserts combine dancing flames and glowing embers for the look of a wood fire but with the convenience and efficiency of a modern gas heater. Direct vent “sealed combustion” technology lets you turn down your central heating system and enjoy your fireplace while “zone heating” just the room you’re in.
The full function remote control iSeries models with intermittent (IPI) electronic ignition comes in 5 stunning traditional log styles (DVIT), or a contemporary option for glass, gems or river rock (DVIC). Traditional log styles come in three sizes to fit most masonry or factory-built fireplaces while the contemporary models are offered in 2 sizes. The large glass viewing window showcases your choice of four beautifully detailed oak Real Fyre® gas log sets or contemporary models:
Five Stunning Log Options and Contemporary Models
IPI Remote Control System
Multi feature remote control system. (For use with 2019 DVIT and DVIC models)

Multi feature remote control system. (For use with pre-2019 DVI models)

Insert Surrounds
3 Sided Surrounds

4 Sided Surrounds



Firebox Liner Options



Decorative Overlay Options
Frame Overlays



Mission Arch Overlays



Mission Overlays



Nest Overlays
Standard Features
Direct Vent Specifications and Brochure
Expansive viewing area showcases the log set and fire to the entire room
Choice of natural gas or propane models in three sizes to fit most fireplaces
Adjustable flames and heat with dual burners (DVIT-30i and DVIT-36i models)
– DVIT-25i: 16,000 to 25,000 BTU’s natural gas & 14,000 to 20,000 BTU’s propane
– DVIT-30i: 9,000 to 32,000 BTU’s natural gas & 10,000 to 29,000 BTU’s propane
– DVIT-36i: 11,000 to 40,000 BTU’s natural gas & 9,000 to 33,000 BTU’s propane
– DVIC-25i: 14,000 to 20,000 BTU’s natural gas & 13,000 to 16,500 BTU’s propane
– DVIC-30i: 18,000 to 25,000 BTU’s natural gas & 17,000 to 21,000 BTU’s propane
High performance 125 CFM blower distributes heat quickly and quietly
Electronic ignition system with battery back-up – saves energy and works in a power failure
Automatic pilot ensures the pilot is operating in cold weather – recommended for reliable operation of direct vent gas hearth products in cold climates
Accent light highlights logs with or without the fire on
Choice of brick pattern (traditional or herringbone) for the look of a masonry fireplace or black porcelain to silhouette the logs and reflect the flames
Surrounds in 3-sided or 4-sided configurations cover most fireplace openings and may be highlighted with decorative overlays in a variety of finishes to match your style and décor
Full Function remote control puts you in command of flame and heat adjustments, thermostatic or timer operations as well as control of the blower and light dimmer
Specifications Fireplace Requirements
Real Fyre Direct Vent Inserts
The specifications, dimensions and clearances listed in this page are for reference purposes only. Refer to the unit owner’s manual prior to instillation and operation of the insert.
Fireplace Requirements | |||||
Minimum Fireplace Opening | DVIC-25 | DVIC-30 | DVIT-25 | DVIT-30 | DVIT-36 |
Front Width | 30 1/2″ | 35″ | 30 1/2″ | 35″ | 38″ |
Rear Width | 21 1/2″ | 22 1/2″ | 21 1/2″ | 22 1/2″ | 26″ |
Depth | 15 1/2″ | 18 1/2″ | 15 1/2″ | 18 1/2″ | 19 1/2″ |
Height | 20″ | 22 1/2″ | 20″ | 22 1/2″ | 26″ |
Minimum Clearance to Combustibles | DVIC-25 | DVIC-30 | DVI-25 | DVI-30 | DVI-36 |
Clearance needed from top edge of insert to combustible trim or 8″ depth mantel (A) |
16″ | 16″ | 16″ | 16″ | 16″ |
Clearance needed from the top edge of insert 12″ depth mantel (B) |
22″ | 22″ | 22″ | 22″ | 22″ |
Clearance needed from side edge of insert to combustible or side wall (C) |
7″ | 7″ | 7″ | 7″ | 7″ |